Optimizing in vitro phage-ciprofloxacin combination formulation for respiratory therapy of multi-drug resistant Pseudomonas aeruginosa infections.

Respiratory infection caused by multi-drug resistant (MDR) Pseudomonas aeruginosa is challenging to treat. In this study, we investigate the optimal dose of anti-pseudomonas phage PEV31 (103, 105, and 108 PFU/mL) combined with ciprofloxacin (ranging from 1/8× MIC to 8× MIC) to treat the MDR P. aeruginosa strain FADD1-PA001 using time-kill studies. We determined the impact of phage growth kinetics in the presence of ciprofloxacin through one-step growth analysis. Single treatments with either phage PEV31 or ciprofloxacin (except at 8× MIC) showed limited bactericidal efficiency, with bacterial regrowth observed at 48 h. The most effective treatments were PEV31 at multiplicity of infection (MOI) of 0.1 and 100 combined with ciprofloxacin at concentrations above 1× MIC, resulting in a >4 log10 reduction in bacterial counts. While the burst size of phage PEV31 was decreased with increasing ciprofloxacin concentration, robust antimicrobial effects were still maintained in the combination treatment. Aerosol samples collected from vibrating mesh nebulization of the combination formulation at phage MOI of 100 with 2× MIC effectively inhibited bacterial density. In summary, our combination treatments eradicated in vitro bacterial growth and sustained antimicrobial effects for 48 h. These results indicated the potential application of nebulization-based strategies for the combination treatment against MDR lung infections.

Stability of bacteriophages in organic solvents for formulations.

Bacteriophages or phages used as an alternative therapy for treating multi-drug resistant infections require formulation consideration. Current strategies to produce phage formulations involving organic solvents are based on empirical practices without a good understanding of phage stability during formulation development. In this study, we investigated the effect of common formulation organic solvents (ethanol, isopropyl alcohol, tetrahydrofuran (THF) and dimethyl sulfoxide (DMSO)) on the stability of Pseudomonas aeruginosa-specific myovirus (PEV1, PEV20) and podovirus (PEV31) phages using biological assay, transmission electron microscopy (TEM) and scattering near field optical microscopy (SNOM). The three phages were mixed with the solvents at different concentrations (25%, 50%, and 75% (v/v)) for 20 min. All phages were fully viable in the organic solvents at 25% (v/v) showing negligible titre changes. At the higher solvent concentration of 50% (v/v), the myoviruses PEV1 and PEV20 remained relatively stable (titre loss 0.4-1.3 log10), whereas the podovirus PEV31 became less stable (titre loss 0.25-3.8 log10), depending on the solvent used. Increasing the solvent level to 75% (v/v) caused increased morphological changes in TEM and decreased viability as indicated by the titre loss (0.32-7.4 log10), with DMSO being the most phage-destabilising solvent. SNOM spectra showed differences in the signal intensity and peak positions in the amide I and amide II regions, revealing altered phage proteins by the solvents. In conclusion, the choice of the solvents for phage formulation depends on both the phages and solvent types. Our results showed (1) the phages are more stable in the alcohols than DMSO and THF, and (2) the myoviruses tend to be more stable than the podovirus in the solvents. Overall, a low to moderate (25-50 % v/v) level of organic solvents (except 50% THF) can be used in formulation of the phages without a substantial titre loss.

Engineering the right formulation for enhanced drug delivery.

Dry powder inhalers (DPIs) can be used with a wide range of drugs such as small molecules and biologics and offer several advantages for inhaled therapy. Early DPI products were intended to treat asthma and lung chronic inflammatory disease by administering low-dose, high-potency drugs blended with lactose carrier particles. The use of lactose blends is still the most common approach to aid powder flowability and dose metering in DPI products. However, this conventional approach may not meet the high demand for formulation physical stability, aerosolisation performance, and bioavailability. To overcome these issues, innovative techniques coupled with modification of the traditional methods have been explored to engineer particles for enhanced drug delivery. Different particle engineering techniques have been utilised depending on the types of the active pharmaceutical ingredient (e.g., small molecules, peptides, proteins, cells) and the inhaled dose. This review discusses the challenges of formulating DPI formulations of low-dose and high-dose small molecule drugs, and biologics, followed by recent and emerging particle engineering strategies utilised in developing the right inhalable powder formulations for enhanced drug delivery.

Advancements in Particle Engineering for Inhalation Delivery of Small Molecules and Biotherapeutics.

Dry powder inhalation formulations have become increasingly popular for local and systemic delivery of small molecules and biotherapeutics. Powder formulations provide distinct advantages over liquid formulations such as elimination of cold chain due to room temperature stability, improved portability, and the potential for increasing patient adherence. To become a viable product, it is essential to develop formulations that are stable (physically, chemically and/or biologically) and inhalable over the shelf-life. Physical particulate properties such as particle size, morphology and density, as well as chemical properties can significantly impact aerosol performance of the powder. This review will cover these critical attributes that can be engineered to enhance the dispersibility of inhalation powder formulations. Challenges in particle engineering for biotherapeutics will be assessed, followed by formulation strategies for overcoming the hurdles. Finally, the review will discuss recent examples of successful dry powder biotherapeutic formulations for inhalation delivery that have been clinically assessed.

Novel antimicrobial agents for combating antibiotic-resistant bacteria.

Antibiotic therapy has become increasingly ineffective against bacterial infections due to the rise of resistance. In particular, ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) have caused life-threatening infections in humans and represent a major global health threat due to a high degree of antibiotic resistance. To respond to this urgent call, novel strategies are urgently needed, such as bacteriophages (or phages), phage-encoded enzymes, immunomodulators and monoclonal antibodies. This review critically analyses these promising antimicrobial therapies for the treatment of multidrug-resistant bacterial infections. Recent advances in these novel therapeutic strategies are discussed, focusing on preclinical and clinical investigations, as well as combinatorial approaches. In this 'Bad Bugs, No Drugs' era, novel therapeutic strategies can play a key role in treating deadly infections and help extend the lifetime of antibiotics.

Topical liquid formulation of bacteriophages for metered-dose spray delivery.

Bacteriophage (phage) therapy is a promising treatment strategy to combat antibiotic-resistant bacteria. Clinical reports from a century ago, as well as recent reports have revealed safety and efficacy of phage therapy for bacterial wound infections. However, the conventional liquid phage formulation and delivery platforms reported lack of dose control as it easily runs off from the infection site and it is impossible to determine total volume transfer. The aim of this study was to formulate phage liquids for topical delivery using a metered-dose spray. Two types of anti-Pseudomonas phages, PEV1 (myovirus) and PEV31 (podovirus) were formulated in 35% ethanol in water containing non-ionic polymers. The formulations were evaluated for physical properties, ease of spray, dripping upon spraying, drying time, in vitro release profiles, antibacterial activity, and storage stability. The optimized phage-polymer spray formulations were easily sprayable with minimal dripping and fast drying time. Phages were rapidly released from the formulation and inhibited the growth of Pseudomonas aeruginosa. Both PEV1 and PEV31 remained biologically stable in the optimized formulations during storage at 4 °C for eight weeks. This study showed the topical spray formulations containing non-ionic polymers in ethanol/water could be a promising and innovative therapeutic system for delivering phages.

Phage-Antibiotic Therapy as a Promising Strategy to Combat Multidrug-Resistant Infections and to Enhance Antimicrobial Efficiency.

Infections caused by multidrug-resistant (MDR) bacteria have highlighted the importance of the development of new antimicrobial agents. While bacteriophages (phages) are widely studied as alternative agents to antibiotics, combined treatments using phages and antibiotics have exhibited Phage-Antibiotic Synergy (PAS), in which antibiotics promote phage replication and extraordinary antimicrobial efficacy with reduced development of bacterial resistance. This review paper on the current progress of phage-antibiotic therapy includes aspects of the mechanisms of PAS and the therapeutic performance of PAS in combating multidrug-resistant bacterial infections. The choice of phages and antibiotics, the administration time and sequence, and the concentrations of the two agents impact the bacterial inhibitory effects to different extents.

Pharmacokinetics and safety of inhaled ivermectin in mice as a potential COVID-19 treatment.

Pharmacokinetic limitations associated with oral ivermectin may limit its success as a potential COVID-19 treatment based on in vitro experiments which demonstrate antiviral efficacy against SARS-CoV-2 at high concentrations. Targeted delivery to the lungs is a practical way to overcome these limitations and ensure the presence of a therapeutic concentration of the drug in a clinically critical site of viral pathology. In this study, the pharmacokinetics (PK) and safety of inhaled dry powders of ivermectin with lactose were investigated in healthy mice. Female BALB/c mice received ivermectin formulation by intratracheal administration at high (3.15 mg/kg) or low doses (2.04 mg/kg). Plasma, bronchoalveolar lavage fluid (BALF), lung, kidney, liver, and spleen were collected at predetermined time points up to 48 h and analyzed for PK. Histological evaluation of lungs was used to examine the safety of the formulation. Inhalation delivery of ivermectin formulation showed improved pharmacokinetic performance as it avoided protein binding encountered in systemic delivery and maintained a high exposure above the in vitro antiviral concentration in the respiratory tract for at least 24 h. The local toxicity was mild with less than 20% of the lung showing histological damage at 24 h, which resolved to 10% by 48 h.

A dual action of D-amino acids on anti-biofilm activity and moisture-protection of inhalable ciprofloxacin powders.

Although inhalation powder aerosols of antibiotics have been used to treat respiratory infections caused by Pseudomonas aeruginosa, biofilms are difficult to clear. Ciprofloxacin and D-amino acids (D-Met, D-Trp and D-Phe) were shown to facilitate P. aeruginosa biofilm removal. Spray dried powders for inhalation tend to be amorphous, hence unstable to moisture which causes deterioration in the aerosol performance. Hydrophobic L-amino acids such as leucine can impart moisture protection. In this study, we hypothesized that co-spray dried formulations of ciprofloxacin and hydrophobic D-amino acids will offer the combined benefits of both anti-biofilm and moisture protection properties. Of the three D-amino acids tested, D-Met and D-Trp (at 5 mM) but not D-Phe reduced clinical isolate P. aeruginosa biofilm loads and the extent of biofilm clearance was further enhanced in the presence of ciprofloxacin. Subsequently, ciprofloxacin was spray dried alone or in combination with 30% (w/w) D-Met or D-Trp. The biological and physicochemical properties of the powders were assessed, including the minimum inhibitory concentration, anti-biofilm activity, particle size distribution and morphology, solid-state properties, water sorption, and aerosol performance. The spray dried combination powders were physically stable and inhalable with fine particle fraction (<5 µm) values of 50-57% when aerosolized. The powders exhibited enhanced anti-biofilm activity compared with ciprofloxacin alone. The presence of D-amino acids provided moisture protection, with the recrystallization event shifting from 50% RH to 80% RH in powders containing D-Trp. In conclusion, the use of D-amino acids (D-Met or D-Trp) is an attractive formulation strategy which offers dual benefits of anti-biofilm effect and moisture protection.

The effects of different doses of inhaled bacteriophage therapy for Pseudomonas aeruginosa pulmonary infections in mice.

OBJECTIVES: Inhaled phage therapy has been revisited as a potential treatment option for respiratory infections caused by multidrug-resistant Pseudomonas aeruginosa; however, there is a distinct gap in understanding the dose-response effect. The aim of this study was to investigate the dose-response effect of Pseudomonas-targeting phage PEV31 delivered by the pulmonary route in a mouse lung infection model. METHODS: Neutropenic BALB/c mice were infected with multidrug-resistant P. aeruginosa (2 × 104 colony-forming units) through the intratracheal route and then treated with PEV31 at three different doses of 7.5 × 104 (Group A), 5 × 106 (Group B), and 5 × 108 (Group C) plaque-forming units, or phosphate-buffered saline at 2 hours postinoculation. Mice (n = 5-7) were euthanized at 2 hours and 24 hours postinfection, and lungs, kidneys, spleen, liver, bronchoalveolar lavage fluid, and blood were collected for bacteria and phage enumeration. RESULTS: At 24 hours postinfection, all phage-treated groups exhibited a significant reduction in pulmonary bacterial load by 1.3-1.9 log10, independent of the delivered phage dose. The extent of phage replication was negatively correlated with the dose administered, with log10 titre increases of 6.2, 2.7, and 9 for Groups A, B, and C, respectively. Phage-resistant bacterial subpopulations in the lung homogenate samples harvested at 24 hours postinfection increased with the treatment dose (i.e. 30%, 74%, and 91% in respective Groups A-C). However, the mutants showed increased susceptibility to ciprofloxacin, impaired twitching motility, and reduced blue-green pigment production. The expression of the inflammatory cytokines (IL-1ß and IL-6, and TNF-α) was suppressed with increasing PEV31 treatment dose. DISCUSSION: This study provides the dose-response effect of inhaled phage therapy that may guide dose selection for treating P. aeruginosa respiratory infections in humans.

Inhaled Delivery of Anti-Pseudomonal Phages to Tackle Respiratory Infections Caused by Superbugs.

Background: Respiratory infections are increasingly difficult to treat due to the emergence of multidrug-resistant bacteria. Rediscovery and implementation of inhaled bacteriophage (phage) therapy as a standalone or supplement to antibiotic therapy is becoming recognized as a promising solution to combating respiratory infections caused by these superbugs. To ensure maximum benefit of the treatment, phages must remain stable during formulation as a liquid or powder and delivery using a nebulizer or dry powder inhaler. Methods:Pseudomonas-targeting PEV phages were used as model phages to assess the feasibility of aerosolizing biologically viable liquid formulations using commercial nebulizers in the presence and absence of inhaled antibiotics. The advantages of powder formulations were exploited by spray drying to produce inhalable powders containing PEV phages with and without the antibiotic ciprofloxacin. Results: The produced phage PEV20 and PEV20-ciprofloxacin powders remained stable over long-term storage and exhibited significant bacterial killing activities in a mouse lung infection model. Conclusion: These studies demonstrated that inhaled phage (-antibiotic) therapy has the potential to tackle respiratory infections caused by superbugs.

Advances in the development of antimicrobial peptides and proteins for inhaled therapy.

Antimicrobial peptides and proteins (APPs) are becoming increasingly important in targeting multidrug-resistant (MDR) bacteria. APPs is a rapidly emerging area with novel molecules being produced and further optimised to enhance antimicrobial efficacy, while overcoming issues associated with biologics such as potential toxicity and low bioavailability resulting from short half-life. Inhalation delivery of these agents can be an effective treatment of respiratory infections owing to the high local drug concentration in the lungs with lower exposure to systemic circulation hence reducing systemic toxicity. This review describes the recent studies on inhaled APPs, including in vitro and in vivo antimicrobial activities, toxicity assessments, and formulation strategies whenever available. The review also includes studies on combination of APPs with other antimicrobial agents to achieve enhanced synergistic antimicrobial effect. Since different APPs have different biological and chemical stabilities, a targeted formulation strategy should be considered for developing stable and inhalable antimicrobial peptides and proteins. These strategies include the use of sodium chloride to reduce electrostatic interaction between APP and extracellular DNA in sputum, the use of D-enantiomers or dendrimers to minimise protease-mediated degradation and or the use of prodrugs to reduce toxicity. Although great effort has been put towards optimising the biological functions of APPs, studies assessing biological stability in inhalable aerosols are scarce, particularly for novel molecules. As such, formulation and manufacture of inhalable liquid and powder formulations of APPs are underexplored, yet they are crucial areas of research for clinical translation.

Enteric-coated bacteriophage tablets for oral administration against gastrointestinal infections.

Intestinal Pseudomonas aeruginosa is highly problematic in immunocompromised patients such as those in intensive care units in hospitals. Phage therapy is an attractive alternative or supplementary therapy to antibiotics as it not only kills multidrug-resistant bacteria, but also minimises the disruption of gut microflora. Solid oral dosage forms (i.e., tablets) have the potential to effectively deliver viable phages to the gastrointestinal tract, but formulation studies have been scarce. In this study, Pseudomonas-targeting phage PEV20 was used as a model to produce tablets suitable for oral delivery by utilising industry-scale tablet compression and tablet coating machines. Phage tablets were produced by (i) spray drying of phages, (ii) direct compression of the phage powders into tablets, and then (iii) tablet coating. The resulting phage tablets had negligible phage titre reduction throughout the process and passed the British Pharmacopeia tests, including friability, weight variation, disintegration and dissolution of the tablets as well as weight gain and disintegration (in 0.1 M HCl and pH 7.4 phosphate buffer) of coated tablets. The developed formulation method can be utilised to produce tablets containing other phages and phage cocktails that are effective against enteric bacterial infections.

In vitro-in vivo correlation of cascade impactor data for orally inhaled pharmaceutical aerosols.

In vitro-in vivo correlation is the establishment of a predictive relationship between in vitro and in vivo data. In the context of cascade impactor results of orally inhaled pharmaceutical aerosols, this involves the linking of parameters such as the emitted dose, fine particle dose, fine particle fraction, and mass median aerodynamic diameter to in vivo lung deposition from scintigraphy data. If the dissolution and absorption processes after deposition are adequately understood, the correlation may be extended to the pharmacokinetics and pharmacodynamics of the delivered drugs. Correlation of impactor data to lung deposition is a relatively new research area that has been gaining recent interest. Although few in number, experiments and meta-analyses have been conducted to examine such correlations. An artificial neural network approach has also been employed to analyse the complex relationships between multiple factors and responses. However, much research is needed to generate more data to obtain robust correlations. These predictive models will be useful in improving the efficiency in product development by reducing the need of expensive and lengthy clinical trials.

Nebulised Isotonic Hydroxychloroquine Aerosols for Potential Treatment of COVID-19.

The coronavirus disease 2019 (COVID-19) is an unprecedented pandemic that has severely impacted global public health and the economy. Hydroxychloroquine administered orally to COVID-19 patients was ineffective, but its antiviral and anti-inflammatory actions were observed in vitro. The lack of efficacy in vivo could be due to the inefficiency of the oral route in attaining high drug concentration in the lungs. Delivering hydroxychloroquine by inhalation may be a promising alternative for direct targeting with minimal systemic exposure. This paper reports on the characterisation of isotonic, pH-neutral hydroxychloroquine sulphate (HCQS) solutions for nebulisation for COVID-19. They can be prepared, sterilised, and nebulised for testing as an investigational new drug for treating this infection. The 20, 50, and 100 mg/mL HCQS solutions were stable for at least 15 days without refrigeration when stored in darkness. They were atomised from Aerogen Solo Ultra vibrating mesh nebulisers (1 mL of each of the three concentrations and, in addition, 1.5 mL of 100 mg/mL) to form droplets having a median volumetric diameter of 4.3-5.2 µm, with about 50-60% of the aerosol by volume < 5 µm. The aerosol droplet size decreased (from 4.95 to 4.34 µm) with increasing drug concentration (from 20 to 100 mg/mL). As the drug concentration and liquid volume increased, the nebulisation duration increased from 3 to 11 min. The emitted doses ranged from 9.1 to 75.9 mg, depending on the concentration and volume nebulised. The HCQS solutions appear suitable for preclinical and clinical studies for potential COVID-19 treatment.

Hydrogel formulations containing non-ionic polymers for topical delivery of bacteriophages.

Hydrogel is an attractive delivery vehicle for phages as it keeps the wound moist, acts as a protective barrier and facilitates wound healing process. The aim of this study was to formulate biologically stable phage hydrogels that enable controlled release of infective phages. Pseudomonas-targeting phages, PEV1 (myovirus) and PEV31 (podovirus) were formulated in hydrogels (109 PFU/g) consisting of non-ionic polymers, including hydroxyethyl cellulose (HEC), hydroxypropyl methylcellulose (HPMC), polyethylene oxide (PEO), polyvinyl alcohol (PVA), hydroxypropyl cellulose (HPC) and polyvinylpyrrolidone (PVP). The formulations were evaluated for physical properties, in vitro release profiles, antibacterial activity, and storage stability. Controlled release of phages was observed in 7.5% PEO, 20% PVA and 75% PVP hydrogels with >108 PFU release within 8 h. Poor phage release (7 × 105-4 × 107 PFU) was observed in 5% HPMC, 5% HEC and 30% HPC gels. The biostability of the optimized hydrogels was phage-specific with less titer loss observed for PEV1 (0-0.8 log) than for PEV31 (0.3-1.4 log). Both phages remained stable in PEO, PVA and HPMC hydrogels with <1 log titer reductions when stored at 5 °C. This study showed that 7.5% PEO and 20% PVA hydrogel formulations could be promising therapeutic systems for delivering phages for the treatment of wound infections.

Administration of dry powders during respiratory supports.

Inhaled drugs are routinely used for the treatment of respiratory-supported patients. To date, pressurized metered dose inhalers and nebulizers are the two platforms routinely employed in the clinical setting. The scarce utilization of the dry powder inhaler (DPI) platform is partly due to the lack of in vivo data that proves optimal delivery and drug efficacy are achievable. Additionally, fitting a DPI in-line to the respiratory circuit is not as straightforward as with the other aerosol delivery platforms. Importantly, there is a common misconception that the warm and humidified inspiratory air in respiratory supports, even for a short exposure, will deteriorate powder formulation compromising its delivery and efficacy. However, some recent studies have dispelled this myth, showing successful delivery of dry powders through the humidified circuit of respiratory supports. Compared with other aerosol delivery devices, the use of DPIs during respiratory supports possesses unique advantages such as rapid delivery and high dose. In this review, we presented in vitro studies showing various setups employing commercial DPIs and effects of ventilator parameters on the aerosol delivery. Inclusion of novel DPIs was also made to illustrate characteristics of an ideal inhaler that would give high lung dose with low powder deposition loss in tracheal tubes and respiratory circuits. Clinical trials are urgently needed to confirm the benefits of administration of dry powders in ventilated patients, thus enabling translation of powder delivery into practice.

Co-spray dried hydrophobic drug formulations with crystalline lactose for inhalation aerosol delivery.

Spray drying is a rapid method for converting a liquid feed into dried particles for inhalation aerosols. Lactose is a major inhalation excipient used in spray-dried (SD) formulations. However, SD powders produced from solutions are usually amorphous hence unstable to moisture. This problem can potentially be minimized by spray drying a suspension (instead of solution) containing crystalline lactose particles and dissolved drugs. In the present study, the suspension formulation containing dissolved budesonide (BUD) or rifampicin (RIF) and suspended lactose crystals in isopropanol alcohol (IPA) were produced. For comparison, powders were also produced from solution formulations containing the same proportions of drug and lactose dissolved in 50:50 IPA/water as controls. These SD powders were stored at 25 °C/60% RH and 40 °C/75% RH for six months. The particulate properties and in vitro dispersion performance were examined at various storage time points. All powders obtained from spray drying of solutions recrystallized after one week of storage at 25 °C/60% RH. In contrast, SD BUD-lactose obtained from suspension did not change until after three-months of storage when the particle size increased gradually with morphology change and yet the crystallinity remained the same as determined by X-ray powder diffraction. For the SD RIF-lactose obtained from suspension, both particulate properties and in vitro powder dispersion performance showed no significant difference before and after storage at both storage conditions. To conclude, this is the first study to show that SD powder formulations obtained from suspensions containing lactose crystals demonstrated superior storage stability performance, which is desirable for inhaled powders.

Dry powder pharmaceutical biologics for inhalation therapy.

Therapeutic biologics such as genes, peptides, proteins, virus and cells provide clinical benefits and are becoming increasingly important tools in respiratory medicine. Pulmonary delivery of therapeutic biologics enables the potential for safe and effective treatment option for respiratory diseases due to high bioavailability while minimizing absorption into the systemic circulation, reducing off-target toxicity to other organs. Development of inhalable powder formulation requires stabilization of complex biological materials, and each type of biologics may present unique challenges and require different formulation strategy combined with manufacture process to ensure biological and physical stabilities during production and over shelf-life. This review examines key formulation strategies for stabilizing proteins, nucleic acids, virus (bacteriophages) and bacterial cells in inhalable powders. It also covers characterization methods used to assess physicochemical properties and aerosol performance of the powders, biological activity and structural integrity of the biologics, and chemical analysis at the nanoscale. Furthermore, the review includes manufacture technologies which are based on lyophilization and spray-drying as they have been applied to manufacture Food and Drug Administration (FDA)-approved protein powders. In perspective, formulation and manufacture of inhalable powders for biologic are highly challenging but attainable. The key requirements are the stability of both the biologics and the powder, along with the powder dispersibility. The formulation to be developed depends on the manufacture process as it will subject the biologics to different stresses (temperature, mechanical and chemical) which could lead to degradation by different pathways. Stabilizing excipients coupled with the suitable choice of process can alleviate the stability issues of inhaled powders of biologics.